Operation
Page EN-11
In order to switch the oven off, you must pull
the mains plug out of the socket or switch off
the applicable electric circuit.
Opening the oven door has no impact
on the oven’s operation. The oven will
continue to heat.
Functions/heating methods
Available functions
The oven is equipped with the following func-
tions (heating methods):
Top and bottom heat, 30–250 °C
With top and bottom heat, the tem-
perature is more intense from the top
or bottom, depending on the shelf
height. Baking and roasting is only
possible on one shelf level. Tips:
– Fill the baking tin only
⅔
full with
cake mixture. Otherwise, the mix-
ture will overflow while baking and
drip into the oven.
– The best results for cakes are
achieved with dark ovenware.
– When roasting, place the meat on
the highest shelf in the oven. Very
fatty meat is best cooked on the grill
with the dripping pan inserted un-
derneath. Lean meat is best cooked
directly in the dripping pan
Convection (with ring heater), 50–
250 °C
In convection mode, the heat is gen-
erated only by the ring heater, which
is positioned around the fan on the
rear wall of the oven compartment.
The fan distributes the heat evenly in
the oven.
The choice of ovenware for baking
with convection is not too important.
Cakes will work in both light and dark
bakeware.
You can also use this function to de-
hydrate food.
Signal tones
When a sensor is touched, an acoustic signal
can be heard. This tells you that the oven has
understood your action.
Setting the time
You must set the time when using the oven
for the first time or after a longer power cut.
The display (1) shows
00:00
.
The time is displayed in 24-hour format.
(1)
(5)
1. Tap the
symbol (5).
In the display, both the zeros will flash for
the hour display.
2. Tap the
sensor (6) or swipe over the
slider (7) to set the number of hours.
3. To switch to the minute display, tap the
symbol.
4. Tap the
sensor or swipe over the slid-
er to set the number of minutes.
5. Tap the
symbol to set the time.
Switching the oven on/off
As soon as a power supply has been con-
nected, the oven will be in stand-by mode.
In order to
– switch on the oven, tap the
sensor (9).
The display will show the current function
and the standard temperature.
– switch the oven to stand-by mode, tap the
sensor(13).
