Page EN-16
Additional functions
Additional functions
Quick pre-heating
(1)
(10)
The oven offers an additional function in or-
der to speed up the pre-heating process (ex-
ceptions: functions
,
,
g
).
• Select a function and a temperature, as
described above, and tap the
sen-
sor (10).
The pre-heating symbol will also appear
in the display. The oven will begin to heat.
Once the pre-set temperature has been
reached, you will hear a beep.
Setting the cooking time
(1)
(5)
You can set a cooking time of up to 9 hours.
The cooking time can be set in the range of
– up to 30 minutes in 1 minute steps.
– from 30 minutes in 5 minute steps.
1. Select a function and a temperature, as
described above.
2. Tap the
sensor (5).
On the left, next to the temperature, the
display will flash ‘
00:00 hr
’.
3. Set the desired cooking time using the
sensors
and
or the slider (7).
After a short time, the cooking duration
will light up permanently.
4. Start the oven’s operation with the
sensor (2).
Once the preset cooking duration has
elapsed, you will hear five signal tones
and the display will show ‘
END
.’ The oven
will switch into standby mode.
The cooking time can be changed at any
time. The change will take effect approx.
6 seconds after the last sensor operation.
To end the cooking process early, switch the
oven off with the
sensor (13).
Timer function
(1)
(11)
Your oven is also equipped with a timer. You
set a specific period, just as you would with
an egg timer. Once the period has expired, a
tone sounds. You can set a duration of one
minute up to 23:59 hours.
