Setting up, connecting and starting up the appliance
Seite EN-19
Heating the solid plates and
oven empty
Before using the appliance the first time, it
must be heated up empty in order to remove
production-related residues from the heating
elements.
During this process, make sure there is
enough ventilation, for example, by opening
a window. It is normal for a light odour and
smoke to develop that will then disappear
shortly thereafter.
– Set the solid plates to the highest level and
let them heat up for approx. 3 minutes.
See Chapter “Using and caring for the hob”
on pageEN-10 for instructions.
– Let the oven heat up for 15 minutes with
top and bottom heat at 220 °C.
See Chapter “Using and cleaning the oven”
on pageEN-12 for instructions.
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
■
Never attempt to repair the appliance yourself. You can put your own and future
users’ lives in danger. Only authorised specialists are allowed to carry out this re-
pair work.
Problem
Possible causes
Solutions / tips
Appliance does not heat up. The appliance is not
connected to the mains.
Connect the mains plug to a
properly installed socket.
The appliance is not drawing
any power.
Check the socket or the fuse.
Troubleshooting table
