Operation
Page EN-12
– Set the temperature to “1” for the minimum
chilling capacity.
– “0” is used to switch off the cooling.
• To increase the appliance’s chilling capac-
ity, turn the temperature adjuster
clock-
wise
towards “7”.
The setting “7” is reached by turning the
dial clockwise as far as it will go.
• To decrease the appliance’s interior tem-
perature, turn the temperature controller
anticlockwise towards “0”.
The setting “0” is reached by turning the
temperature controller as far as it will go.
• First select a medium setting.
• If, for example in summer, the ambient
temperature increases, so select a lower
setting accordingly.
If you set a lower temperature, you will
need higher cooling performance. This
increases the energy consumption.
A fridge thermometer is required to be able to
control the temperature inside the appliance.
• Place the fridge thermometer in the cen-
tre of the bottom storage rack (5).
Switching the LED light on
and off
(7)
(8)
Using the LED On/Off switch (7) you can turn
the LED light (8) on and off. The LED On/Off
switch is located inside the appliance.
To switch the LED light
• on, set the LED On/Off switch to “
l
”.
The LED light will light up.
• off, set the LED On/Off switch to “
O
”.
The LED light will go off.
Interior equipment
The storage racks (5) can be removed and
rearranged as necessary.
1. Remove the storage racks.
2. Place the storage racks in the new posi-
tion.
