Changing the door hinges
Page EN-23
(5)
(5)
(17)
9. Remove the screw (17) and the screw
foot (5) and screw in both parts on the
opposite side.
(5)
(17)
10. Now screw in both the screw and the
screw foot on the opposite side.
Installing the glass door
(15)
(15)
(16)
1. Tighten the lower hinge (15) on the other
side using (16) the screws.
2. Put the washers (14) on the lower hinge.
3. Rotate the glass door (2) 180° and care-
fully insert it on the lower hinge. Firmly
hold onto the glass door. It is still loose.
4. Ensure that the glass door is positioned
properly. Adjust the door if necessary. Re-
peat steps 1 to 4.
(12)
(13)
5. Tighten the upper hinge (13) with the
screws (12).
6. Place the hinge cover (11) on the upper
hinge and firmly press it down.
7. Insert the blanking plate (10) on the oppo-
site side at the top.
8. Check whether the door seal is securely
in place (see page EN-15).
9. Re-insert the storage racks (6) and (7).
