Changing the door hinges
Page EN-25
You can change the position of your refrig-
erating appliance’s door hinges if necessary.
This work requires some manual dexterity.
Please read the following steps completely
before changing the hinges.
You will need the following tools:
– PH2 cross-tip screwdriver
– 8 mm spanner
1. Ensure that the appliance is not connect-
ed to the mains.
2. Close both doors.
3. Remove the upper hinge plate. Use a size
8 spanner or a cross-headed screwdriver
to remove the screws.
4. Remove the door to the fridge compart-
ment.
(26)
5. Detach the middle hinge plate (26).
(27)
6. Detach the mounting bracket (27) and
screw it back in on the opposite side.
7. Remove the freezer compartment’s door.
(28)
(29)
8. Transfer the lower hinge pin (28) over.
Make sure that you also transfer over
the sleeve (29) for the hinge pin.
9. Reinsert the freezer compartment’s door
and close it.
(26)
10. Reattach the middle hinge plate (26) on
the opposite side.
11. Reinsert the fridge compartment’s door
and close it.
Changing the door hinges
