Start-up
Page GB-16
Switching on appliance
Installation materials
(15)
(14)
(16)
(17)
(18)
(19)
Quantity
1
2
2
2
2
12
In addition to the package contents, you will
require
– a medium sized cross-slotted screwdriver,
– a pair of flat-nosed pliers,
– the assistance of another person, where
possible.
NOTICE
Risk of damage!
Improper handling of the refrigerator may
result in damage.
■
The refrigerator should be installed by a
specialist, otherwise any warranty claims
will be void.
Please read through the work steps first be-
fore you start installing the refrigerator.
1. Before installing and connecting the appli-
ance, switch off the relevant power circuit
and/or turn off the relevant fuses.
2. Please remove the door compartments (7),
the vegetable drawer (8) and the glass
shelves (9) and (10).
(17)
(19)
3. Screw the elbows (17) onto the appliance
door with the screws (19). Pre-mark the
screw holes with a Ø 2.5 mm nail.
40 mm
4. Insert the appliance into the built-in cabinet.
The distance between the appliance and the
lower edge of the built-in cabinet must be ap-
prox. 40 mm.
To make sure the joint profile can be clamped,
a gap of 4 mm in the entire height between ap-
pliance and built-in cabinet must be retained
on the opposite side of the door hinges.
