Installation
Page EN-29
13. Check that the doors open and close eas-
ily and that the appliance door seals prop-
erly when closed.
If necessary, adjust the position of the re-
frigerating appliance and of the slides and
runners.
(22)
(21)
14. Once the doors open and close correct-
ly, screw the refrigerating appliance to
the built-in cabinet. To do so, use 3 short
screws (22) at the top and the two long
screws (21) at the bottom.
(23)
15. With the door open, press the sealing
strip (23) into the gap between the refrig-
erator and the built-in cabinet.
Installation is now complete.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it (see “Defrosting and cleaning the freezer
compartment” on page EN-21).
You will find all important information
about operation from page EN-12.
