Installation
Page EN-28
(18)
14. With the appliance doors open, press
the sealing strip (18) into the gap be-
tween the refrigerator and the built-in
cabinet.
15. Finally, screw the two mounting brack-
ets between the upper and lower door
with the built-in cupboard. Use two short
screws each for this.
(16)
16. Insert the cover (16) for the mounting
bracket on the mounting bracket on the
opposite side of the door.
The installation is now complete.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it (see “Cleaning the fridge” on page EN-18)
and (see “Defrosting and cleaning the freez-
er” on page EN-19).
You will find all important information
about operation from page EN-11.
