First use
page EN-25
(29)
7. Level the appliance by adjusting its
screw feet (29) to the right height.
8. Use a spirit level to check whether the
appliance is stable.
9. Slide the appliance into the housing
cabinet.
130
A-B +8
130
(19)
(21)
10. Fasten the brackets (19) to the cabinet
front panel using the screws (21).
A
B
The brackets must be positioned 130 mm
from the centre of the cabinet front panel.
The distance from the brackets to the top
edge of the cabinet front panel is calculated
using the distance between the appliance
door and worktop (A) and the distance be-
tween the adjacent cabinet and worktop (B).
Subtract the latter from the former and then
add 8 mm (i.e. A - B + 8 mm).
(18)
(17)
(19)
(21)
(30)
11. Attach the cabinet front panel to the
double-ended screws (17). using the
brackets (19).
12. Tighten the nuts (18) slightly.
13. Attach the pre-installed brackets (30)
to the bottom of the cabinet front panel
using the screws (21).
Summary of Contents for HEKS8260E
Page 64: ......
