Problem
Possible cause
Solutions, tips, explanations
The appliance
doesn’t cool suffi-
ciently.
Ambient temperature too
low or too high.
Adjust the ambient temperature to the climate
category (see “Intended use” on page EN-4).
Compressor seems defec-
tive.
Activate “SUPER FRZ.” and “SUPER COOL”
simultaneously (see “MODE” on page EN-13).
If the compressor does not switch on within an
hour, please contact our service department
(see page EN-30).
The display shows
the following:
A component for regulating
the humidity in the unit has
been inadvertently switched
off.
Please switch it on again to ensure proper op-
eration of your appliance:
• Press and hold the sensor button FRZ.
TEMP. (15). Hold for 7seconds until the
display shows “ON” for 3 seconds and
there is an audible beep.
Appliance is mak-
ing a noise.
Operating noises are func-
tional and are not a sign of
malfunction.
Humming: Refrigeration unit is running.
Flowing noise: Refrigerant is flowing through
the pipes.
Clicking: Compressor is switching on or off.
Disturbing noises.
Check that it is stable.
Remove any objects from the appliance.
Remove any foreign matter from the back of
the appliance.
Error messages
If one of the following error messages appears on the display, please contact our service depart-
ment (see page EN-30):
Error code
Error description
E1
Temperature sensor error in fridge
E2
Temperature sensor error in freezer
E4
Defrost sensor error in fridge
E5
Defrost sensor error in freezer
E6
Communication error
E7
Error on the sensors for the monitoring of the temperature circulation
EH
Moisture sensor error
Troubleshooting table
Page EN-29