Page EN-34
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
The dishwasher
cannot be
switched on.
The mains plug has not
been inserted into a socket.
Insert the mains plug into the socket.
There is no voltage being
supplied through the socket.
Check the fuse. Check the socket by
connecting another device.
The selected
dishwashing
programme will
not start or it
stops.
The dishwasher’s door is not
closed properly.
Close the dishwasher door.
The water tap is not on
properly.
Turn the water tap on completely.
The inlet hose is defective.
Contact our Service Centre
(see page EN-37).
There is a risk of overflowing.
The electrical water stop
system has been activated.
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our service department (see
page EN-37).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers –
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-37).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
