HGS 14355A2, HGS 14355A2S
Unpacking and set-up
11
Preparation
Unpacking and set-up
Transport
NOTICE
Risk of damage!
Improper handling of the freezer may result in dam-
age.
• Transport the freezer at a maximum angle of 45°.
• Never tilt the freezer into a horizontal position. Only
rest it against the wall to attach and remove the door.
Unpacking
NOTICE
Improper handling of the freezer may result in dam-
age.
• Do not use any sharp objects when removing the
protective film from the door surface.
– Remove the packaging material and all internal and external
protective films.
Setting up the freezer
To achieve the highest possible cooling performance with the least
energy consumption, choose a location that
– is dry, well-ventilated and not too warm
– is not exposed to direct sunlight
– measures at least 8 m
3
.
We do not advise positioning the appliance next to an oven, stove
or radiator. The minimum distances to such appliances are:
– to electric stoves: 3 cm
– to oil and coal burning stoves: 30 cm
– to refrigerators: 2 cm
– to washing machines/dishwashers: 2 cm
If these distances cannot be maintained, put an insulating plate
in between. If there is underfloor heating in the room where the
freezer is to be installed, place an insulating plate of solid material
underneath the appliance.
– To ensure sufficient air circulation, do not place the freezer di-
rectly against the wall.
