HGS 17060A2, HGS 17060A2S
5 minutes for your safety
9
Information
CAUTION
Risk of injury during transit!
The freezer is very heavy and can cause injury if, for
example, it falls on your feet.
• Seek the help of another person for transport, setting
up, positioning and changing the hinge position.
• Check that entry route and installation location are
free of obstacles (e.g. closed doors or objects lying
on the floor).
NOTICE
Risk of damage!
Improper handling of the freezer may result in damage.
• Do not freeze carbonated drinks! Water expands
when frozen and can burst the container.
• Only freeze strong alcohol standing upright and closed
tightly.
• Do not store glass or metal containers of liquid.
• Bases, drawers, doors, etc. must not be used as steps
or for support purposes. You could be injured as a
result.
• Where possible, transport the freezer only at a maxi-
mum inclination of 45°.
• Place the freezer on a level and stable surface only.
• If possible, do not tilt the freezer into a horizontal po-
sition. Only rest it against the wall to change the door
hinges.
If your freezer has nevertheless been transported
horizontal for an extended period, lubricant from the
compressor may have got into the refrigeration circuit.
In such case leave the freezer standing in its normal
position for approx. 12 hours before you switch it on.
This allows the lubricant enough time to flow back into
the compressor.
• The insulation of your freezer is made of polyurethane
with environmentally compatible pentane insulating
foam. Do not use any electrical heating appliances,
scrapers, knives or any kind of aid with an open flame,
for example candles, to defrost. The thermal insula-
tion and the interior are scratch and heat-sensitive
and can melt.
