HGS 17060A2, HGS 17060A2S
Setting up the freezer
14
Preparation
11. Tilt the freezer backwards slightly (max. 45 °). Unscrew both
front screw feet.
12. Remove the bottom hinge plate
11
as well as the mounting
plate
12
and the screw
13
.
11
12
13
13. Place the hinge pin, including the nuts and spring washer,
into the hole of the hinge plate on the opposite side
11
.
14. Screw the hinge plate
11
tightly back onto the opposite side.
11
17. Screw the upper hinge plate tightly back onto the opposite
side so that the hinge pin is in the door’s hinge bushing.
18. Reattach the temperature controller
1
if it fell out while
changing the hinges.
You have successfully changed the door hinges.
15. Flip over the mounting plate
12
and attach it and the screws
13
onto the opposite side of the freezer.
16. Lift the door back onto the hinge pin and hold it in place so
that it remains open.
12
