Changing the door hinges
Page GB-22
7. Place the cover back on the freezer. Push
down on both sides (left and right) of the
front of the cover until you hear it click into
place.
8. Screw the two screws tightly back onto the
cover. To do this, use a cross-head screw-
driver. Secure the two screw covers.
9. Tip the freezer backwards (maximum
45°) so that you can also move the lower
door hinge.
10. Unscrew the two front screw feet (3).
11. Unscrew the lower hinge plate. To do
this, use an 8 mm spanner or a cross-
head screwdriver.
12. Remove the door.
13. Remove the plastic insert from the
underside of the door.
14. Insert the loose supplied plastic insert on
the new hinge side and screw it tight.
15. Unscrew the lower hinge plate. Loosen
the hinge bolts with a 10 mm spanner.
Loosen the screws and reinsert the
screws and the hinge bolts from the
other side.
Summary of Contents for HGS 85355A3I
Page 57: ......
