Changing the door hinges
Page GB-21
Changing the door hinges
The door hinges are on the right upon delivery.
As changing the door hinges requires some
manual skills, please read through the steps
of the procedure beforehand. To change the
door hinges, you will need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket
wrench
1. Pull out the blind plug from the top of the
door.
2. Carefully lever out the two screw covers
on top of the cover using a slotted screw-
driver.
3. Unscrew the two screws (on the left and
right) from the top of the cover. To do this,
use a cross-head screwdriver.
4. Lever out the two sides of the cover on
the front slightly and lift the cover up. En-
sure that you do not damage the temper-
ature controller in the process.
5. Unscrew the three fixing screws for the
hinge plate and the two screws on the
opposite side. To do this, use an 8 mm
spanner or a cross-head screwdriver.
Remove the hinge plate.
6. Screw the hinge plate as well as the two
screws back onto the respective opposite
side.
Summary of Contents for HGS 8555A3W
Page 57: ......
