First use
Page EN-21
(4)
5. Level out any unevenness on the ground
using both of the front screw feet (4).
Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
About climate categories
• Always ensure the prescribed ambient temperature is maintained (see “Intended use” on
page EN-4).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone designation
Code Definition
extended temperate zone SN
This cooling appliance is designed for use at ambient
temperatures of +10 °C to +32 °C.
temperate zone
N
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +32 °C.
subtropical zone
ST
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +38 °C.
tropical zone
T
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +43 °C.
If the room temperature drops significantly below this, the appliance will not switch on as often.
This indicates that an unwelcome increase in temperature may occur.
6. Repeat the adjustment until the appliance
is upright and secure. The appliance must
not wobble.
Cleaning before use
In order to remove the odour which is present
in all new appliances, wipe down the interi-
or prior to first use with a solution made of
100 ml vinegar and 200 ml water. Then wipe
it out with clean water and dry all of the parts
off afterwards.
