Operation
Page EN-11
Change the cooling power
• To set the cooling power, touch the “Set”
button (9) repeatedly until the desired
power level is displayed.
The display of the set power level flashes
for approx. 5 seconds: The power level
is set.
1
2
3
4
5
Each time the “Set” button (9) is pressed,
a higher cooling power is set; when the
setting reaches level “5”, it reverts to level
“1”.
The following table gives a general over-
view of the interior temperatures that can be
achieved with the individual settings (± 2 °C,
respectively):
Setting
Temperature
1
approx. –14 °C
2
approx. –16 °C
3
approx. –18 °C
4
approx. –20 °C
5
approx. –22 °C
• First select a medium setting.
• If, for example in summer, the ambient
temperature increases, so select a lower
setting accordingly.
To be able to check the cooling power, ideally
you will need 2 refrigerator/freezer thermom-
eters.
The correct temperature in the freezer area is
–18 °C. These temperatures can be reached
by setting the cooling power to level “4”. It
is highly recommended to use fridge/freezer
thermometers to find out the actual temper-
atures.
The ideal temperature for the freezer is
–18 °C.
Activating quick freezing
In the “Fast freezing” operating mode, the
freezing area is cooled down very quickly.
• To activate the quick freeze, press the
“Set” button (9) for approx. 3 seconds.
The “Quick freeze active” indicator (8)
lights up on the control panel (1).
The temperature indicator (10) will go out.
Deactivating quick freezing
Quick freezing is automatically deactivated
after 50 hours.
• To deactivate the quick freeze manually,
touch the “Set” button (9) for 3 seconds.
The
“Quick freezing active” indica-
tor (8) goes out. The respective tempera-
ture indicator (10) will return to the original
setting.
High temperature alarm
When the temperature in the freezer rises
above –8 °C for more than 2 hours, the high
temperature alarm is entered, and the buzzer
will sound an alarm.
When the temperature falls again below
–8 °C, the alarm will automatically be can-
celled.
• To cancel the sound alarm, press the
“SET” button (9).
