Space required according to the appliance
dimensions
A:
1722 mm
B:
595 mm
C:
300 mm
D: 676 mm*)
E:
1186 mm**)
F:
50-100 mm
G:
≥ 100 mm
H: 135 °
I:
1015 mm
*) Including handle
**) Including appliance parts on the rear of
the appliance
– To prevent the formation of a flammable
gas-air mixture in the event of a leakage
in the refrigeration circuit, the installation
space must have a minimum size of 1 m
3
per 8 g of refrigerant in compliance with
the EN 378 standard. The amount of re-
frigerant contained in your appliance can
be found on the data sheet at the end of
this user manual.
– The appliance must only be placed on a
level and firm surface. The surface must be
strong enough to support the appliance’s
weight when fully laden.
– Suitable locations are dry, well-ventilated
areas that are cool if possible.
– Unsuitable locations are ones with direct
sunlight or which are directly next to an
oven, hob or radiator.
– The following minimum distances must be
maintained:
– from electrical hobs
10 cm
– from oil and coal burning stoves 10 cm
– from other cooling appliances
10cm
– from washing machines/
dishwashers
10cm
– If you would like to reduce these distances,
you can fit an insulation plate between the
appliances.
Space requirement diagram (when the door is open and when the door is closed)
Start-up
Page EN-23
Summary of Contents for HGS17260A2NF
Page 64: ......
