Fridge-freezer assembly instructions
Page EN-21
Fridge-freezer assembly instructions
The freezer gives you the option of transforming it into a so-called side-by-side fridge-freezer
setup. Simply expand the freezer by adding the appropriate refrigerator (for the order number,
see chapter „Service department“ on page EN-26). Proceed as described in the following.
Key requirements for setting up the appliances
– You have read chapter „Safety“ from see EN-5 and understand all the safety notices.
– The device has been unpacked and a suitable location selected as described in chapter „Start-
up“ in the appliance’s user instructions.
– You have removed the appliance’s mains plug from the plug socket.
Assembling the appliance
WARNING
Risk of injury!
Improper handling of the appliance may result in injury.
■
The appliance is heavy and bulky. Have a second person help you to transport, set
up and assemble the appliance.
■
Bases, drawers, doors, etc. must not be used as steps or for support purposes.
■
Do not place heavy objects on the appliance, as they could fall down.
Parts for assembly
(22)
2× Connecting plate
(23)
1× Connecting piece
(24)
1× Cover
(25)
1×
Middle profile (the middle profile is attached to
the side of the freezer.)
(26)
8× External hex screw
(27)
2× Cross-head screwdriver
(28)
2× Cap
