Fridge-freezer assembly instructions
Page EN-22
1. Stand the refrigerator and the freezer
next to one another at a spacing of
10 mm. The door handles on the appli-
ances should be pointing to one another.
2. Compare the standing height of both
appliances. To connect the appliances,
both must stand at the same height.
Cancel out any difference in height using
the screw feet (see chapter „Setting up
and aligning the appliance“ in the user
instructions).
3. Open both doors and remove the covers
and the dummy plugs using a screwdriver.
4. Remove the stickers from the bases of
the appliances and take the screws out.
Use a small cross-headed screwdriver.
(29)
(22)
(30)
(26)
(22)
5. Place the connecting plates (22) with a
spacer (30) at the bottom between both
appliances.
The spacer is positioned between the
appliances. The holes (29) in the con-
necting plate sit perfectly over the screw
holes in the appliances.
6. Screw the connecting plates tight using
external hex screws (26).
