Fridge-freezer assembly instructions
Page EN-22
Fridge-freezer assembly instructions
The freezer gives you the option of transforming it into a so-called side-by-side fridge-freezer
setup. Simply expand the freezer by adding the appropriate refrigerator (for the order number,
see chapter “Service“ on page EN-27). Proceed as described in the following.
Key requirements for setting up the appliances
– You have read chapter “Safety” from page EN-5 and understand all the safety notices.
– The device has been unpacked and a suitable location selected as described in chapter “Start-
up“ in the appliance’s user instructions.
– You have removed the appliance’s mains plug from the plug socket.
Assembling the appliance
WARNING
Risk of injury!
Improper handling of the appliance may result in injury.
■
The appliance is heavy and bulky. Have a second person help you to transport, set
up and assemble the appliance.
■
Bases, drawers, doors, etc. must not be used as steps or for support purposes.
■
Do not place heavy objects on the appliance, as they could fall down.
Parts for assembly
(22)
2×
Connecting plate
(23)
1×
Connecting piece
(24)
1×
Cover
(25)
1×
Middle profile (the middle profile is attached to
the side of the freezer)
(26)
8×
External hex screw
(27)
2×
Cross-head screw
(28)
2×
Cap
