Operation
Page EN-12
Ũ
30
(13)
(8)
(7)
The temperature indicator jumps to
–30 °C.
• To deactivate the “Super” mode, press the
“Super” button (7) again.
If the appliance is not manually deacti-
vated, the “Super” mode will automati-
cally switch off after 52 hours, and the
appliance will then switch on the previously
set temperature.
Deactivating button lock
The appliance automatically self-locks if no
button is pressed for 30 seconds.
• To switch the button lock off, press the
“Super” button (7) for approximately 3
seconds until the temperature indicator
flashes once.
Converting the temperature
indicator from °C into °F
The appliance’s factory setting is a temper-
ature indicator in °C. If you wish, you can
change this to °F:
04
(13)
(8)
(7)
1. Press the “Super” button (7) for approx.
3 seconds until the temperature indica-
tor (13) flashes once.
2. Press the “Temp.” button (8) for approx-
imately 4 seconds.
39
(13)
(8)
(7)
The display will change to (12).
3. To change the temperature indicator back
to °C, repeat the work steps 1 and 2.