Operation
Before getting started
– Read the chapter„Safety“ from page GB-35,
particularly all the safety instructions.
– Set up and connect the appliance as de-
scribed in the „Before starting to use the
appliance“ chapter from page GB-21.
Switching the appliance on
and off
Switching on
The appliance is switched on as soon as the
mains plug is plugged in. The compressor
starts to work, the refrigerant flows through
the pipes and a quiet humming sound can
be heard.
MED
MIN
(1)
• Use the temperature controller (1) to set
the desired cooling temperature.
If the appliance makes worrying
noises, check the solid base and
remove any objects that may be on top
of the appliance.
Switching off
• To switch the appliance off, pull the mains
plug out of the socket.
Operation
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature in the fridge and freezer compart-
ment.
■
Always adhere to the prescribed
ambient temperature (see “climate
classes” in the data sheet at the end
of this user manual).
MED
MIN
MAX
(1)
Using the temperature controller (1), you can
set the temperature in the fridge and freezer
compartments.
• First select a medium setting.
• If, for example in summer, the ambient
temperature increases, so select a lower
setting accordingly.
In order to
– increase the cooling output, turn the tem-
perature controller (1)
in a clockwise di-
rection
.
– to a higher temperature, turn the tempera-
ture controller (1)
counterclockwise
.
Operation
Page GB-11
