Start-up
Page EN-14
Changing the door hinges
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before changing the hinges.
In addition to the package contents, you will
require:
– Star-headed screwdriver (PH2)
– Medium size flat-headed screwdriver
– Size 7 and 8 spanner
Removing the doors
1. Pull the mains plug out of the socket.
(11)
2. Carefully lift the hinge faceplate (11) up
with the help of the flat-headed screwdriv-
er.
(12)
3. Also remove the covering plate (12) on
the opposite side.
(13)
(14)
4. Loosen the screws (13) with the
star-headed screwdriver or the size
8 spanner, and remove the upper
hinge (14).
(15)
(16)
(17)
5. Open the fridge door and lift it vertical-
ly upwards from the bolt on the middle
hinge (15).
6. Set the fridge door aside.
7. Unscrew both screws (16) on the middle
hinge (15) and pull the middle hinge (15)
out of the fridge door.
8. Remove the washer (17) from the middle
hinge (15).
9. Lift the fridge door up and off and set it
aside.
Preparing the hinges
(18)
(19)
(14)
1. Unscrew the nuts (18) from the hinge
bolt (19) using a size 7 spanner. Unscrew
the hinge bolt (19) from the upper side of
the upper hinge (14) and re-screw it back
onto the bottom.
Re-screw the nuts (18) tightly on to the
hinge bolt (19).
