Start-up
Page EN-25
Changing the door hinges
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before changing the hinges.
In addition to the package contents, you will
require:
– Star-headed screwdriver (PH2)
– Medium size flat-headed screwdriver
– 8 and 10-sized spanner
Removing the doors
1. Pull the mains plug out of the socket.
(11)
2. Carefully lift the hinge faceplate up (11)
with the help of a flat-headed screwdriver.
(12)
3. Also remove the covering plate (12) on
the opposite side.
(13)
(14)
4. Loosen and remove the screws (13) and
remove the upper hinge (14).
(15)
(16)
(17)
5. Open the fridge compartment door and
lift it vertically upwards from the bolt on
the middle hinge (15).
Set the door aside.
6. Unscrew both screws on the (16) middle
hinge (15) and pull the hinge (15) out of
the lower door.
7. Remove the washer (17) from the mid-
dle hinge (15).
8. Lift the freezer compartment door up and
off and set it aside.
Preparing the hinges
(18)
(19)
(14)
1. Unscrew the nuts (18) from the hinge
bolts using a size 10 spanner (19). Un-
screw the hinge bolts (19) from the upper
side of the hinge faceplate (14) and re-
screw them back onto the bottom.
Rescrew the nuts tightly on to the hinge
bolts.
