Changing the door hinges
Page EN-27
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before commencing work.
In addition to the package contents, you will
need:
– a medium-sized slot screwdriver and Phil-
lips screwdriver;
– a size 8 and size 10 spanner;
– pliers.
Removing the doors and
hinges
1. Disconnect the mains plug from the socket.
(15)
(16)
(18)
(17)
2. Unscrew the handles (15) and (17) from
the doors (16) and (18).
(19)
(19)
(20)
3. Using a flat-tip screwdriver, lift out the pro-
tective covers (19) found on the appliance
cover.
(21)
(21)
(20)
4. Using a Phillips screwdriver, loosen the
retaining screws (21) before removing the
appliance cover (20).
(22)
(23)
(16)
5. Unscrew the 3 screws (22) located on the
upper hinge (23).
6. Open the fridge door (16), remove it and
place it to one side.
7. Remove the upper hinge (23).
(25)
(24)
8. Unscrew the middle hinge (24) and
remove it. Pay attention to the plastic
discs (25). These must later be reposi-
tioned correctly in the same place.
Changing the door hinges
