Start-up
Page GB-21
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer compartment out prior to first use
with a solution made from 100 ml vinegar
and 200 ml water. Then wipe it out with clean
water and dry all of the parts off afterwards.
Electrical connections
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important information
about operation from page GB-10.
Changing the door hinges
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before commencing work.
In addition to the package contents, you will
need:
– a medium-sized slot screwdriver and Phil-
lips screwdriver;
– a size 8 and size 10 spanner;
– pliers.
1. Disconnect the mains plug from the sock-
et.
(12)
2. Unscrew the screw (12). Then remove the
hinge fitting.
3. Unscrew the 3 screws on the upper hinge
and remove the hinge.
4. Open the upper door, take it out and set it
aside.
(13)
5. Move the cover panel (13) at the top of
the appliance to the opposite side.
