Operation
Page EN-13
• In order to
– increase the refrigeration output in the
fridge and freezer, turn the temperature
controller towards “7”.
– To decrease it, turn the temperature con-
troller towards “1”.
Ideally you need 2 refrigerator/freezer ther-
mometers to be able to check the refrigera-
tion output.
• Place
– one above the vegetable drawer (8) in
the fridge; the ideal temperature here is
+6 °C.
– the other in the freezer; the ideal temper-
ature in the freezer is −18 °C.
Shelves and door shelves
The glass shelves (12), bottle rack (11) and
the door shelves (2) and (5) can be taken out
and rearranged if necessary.
You will achieve the most efficient use of en-
ergy for your appliance if you combine the
drawers, glass shelves and door shelves as
shown in the diagram on page EN-11.
• In order to remove the door shelves, sim-
ply pull them upwards out of the holders.
• To remove the glass shelves, lift them
slightly at the back and then pull them out
of the guide rail.
• Place the door and glass shelves back
into the desired positions.
Filling the water tank
CAUTION
Contaminated food can cause health
problems.
■
Clean the water tank if it has not been
used for 48 hours; fl ush the water sys-
tem if water has not been drawn for
5 days.
■
Use only fresh drinking water to fi ll
the water tank. Do not fi ll the water
tank with any other fl uids.
3
(4)
(14)
• Open the cap (14) of the water tank (4),
pour fresh drinking water in the water
tank (4), and then replace the cap (14).
Using the water dispenser
(15)
(16)
• Push the water container against the dis-
penser guide (15) of the water dispens-
er (16).
Chilled water will begin to pour into
the container.
Water will stop being dispensed when you
remove the container from the dispenser
guide (15) or when there is no more water
in the water tank (4).
Summary of Contents for HKGK18560EWDI
Page 38: ...Technische Daten Seite DE 38...
Page 74: ...Product fiche concerning Regulation EU No 2019 2016 Page EN 36...
Page 75: ...Page EN 37...
Page 76: ......