Preparing the doors
(38)
(39)
1. Swap the positions of the blind plug (38)
and the insert (39) on the freezer door.
(5)
2. Turn the freezer door (5) over.
(41)
(40)
(42)
3. Loosen the screw (41) and remove the
metal reinforcement (40) and the plastic
sleeve (42).
(41)
(43)
(42)
4. Insert the plastic sleeve (42) on the
opposite side and use the screw (41)
to screw the supplied metal reinforce-
ment (43) on the opposite side.
5. Turn the freezer door (5) over again.
(2)
6. Turn the fridge door (2) over as well.
7. Repeat steps 3 and 4 on the fridge
door (2) and turn the fridge door (2) back
over again.
(24)
(2)
8. Insert the plastic insert (24) on the top of
the fridge door (2).
Changing the door hinge direction
Page EN-30
