HKS 14355GA1, HKS 14355GA1S
Changing the door hinges
14
Preparation
9. Tilt the refrigerator backwards (maximum 45°) to allow you to
adjust the lower door hinge also.
10. Unscrew both front levelling feet.
11. Unscrew the lower hinge plate. To do this, use an 8 mm
spanner or a cross-head screwdriver.
12. Move the hinge pin to the opposite side of the hinge plate. To
loosen and tighten the nut, use a 10 mm spanner or the un-
derside of a screw foot.
13. Screw the hinge plate tightly back onto the opposite side.
Make sure that the hinge pin is in the hinge bushing of the
door.
The door will now function properly again.
14. Screw the two levelling feet back on tightly and align the re-
frigerator.
15. Carefully stand the refrigerator upright.
16. Reinsert the blind plug on the opposite side of the door.
You have successfully changed the door hinges.
7. Place the cover back on the refrigerator. Push down on both
sides (left and right) of the front of the cover until you hear it
click into place.
8. Screw the two screws tightly back onto the cover. To do this,
use a cross-head screwdriver. Secure the two screw covers.
Summary of Contents for HKS 14355GA1
Page 60: ......
