Start-up
Page EN-16
4. Unscrew the two screws securing the
upper hinge plate. Use an 8 mm wrench
or a cross-headed screwdriver.
5. Remove the hinge plate.
6. Take out the blind cover and insert it on
the opposite side.
7. Remove the refrigerator door.
8. To adjust the lower door hinge, tilt the
refrigerator to a maximum of 45 ° to the
rear.
9. Unscrew the screw-on foot (7).
10. Unscrew the lower hinge plate. Use
a size 8 spanner or a a cross-headed
screwdriver.
11. Loosen the stud bolt with a flat-headed
screwdriver.
12. Turn the hinge plate and screw the stud
bolt to the other side of the hinge plate.