HKS17060EW, HKS17060ES
Setting up the refrigerator
EN-13
Attaching the door handle
Depending on which side the door hinge is installed, you can at-
tach the door handle
10
.
1. Loosen the two side screws on each side of the door.
2. Use the supplied screws to attach the door handle
10
.
3. Cover the screws with the supplied cover caps.
Levelling the refrigerator
The refrigerator must be positioned on level, firm surface. Check
the position of the refrigerator with a spirit level. The refrigerator
must not move when the door is opened. The front levelling feet
can be adjusted to offset uneven floors.
1. Close the refrigerator door.
2. Tilt the refrigerator backwards slightly.
3. Screw/unscrew the screw feet as required.
4. Return the refrigerator to the upright position and check the
alignment with a spirit level.
5. Repeat the steps as required until the refrigerator is level.
To ensure adequate air circulation, the entire space above the
refrigerator must remain clear of obstructions. Do not place the
refrigerator directly against the wall. Leave space of at least 3 cm.
10