– If underfloor heating is installed at the set-
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.
Assembling the spacers
To ensure adequate air circulation, the appli-
ance must not lean directly against the wall.
(18)
• To maintain the correct distance to the
wall, screw the two supplied spacers (18)
into the threaded holes at the top on the
back of the appliance.
(18)
• Turn the spacers (18) by 90°, in order to
slot them into the fins.
Setting up and aligning the
appliance
NOTICE
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
■
The entire space above the appliance
must remain clear.
■
The appliance should not stand di-
rectly against the wall (leave a mini-
mum clearance of 5 cm).
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
Start-up
Page GB-24