Getting started
Page EN-11
3. If underfloor heating is installed at the
set-up location, place the refrigerator on
an insulation plate made from solid ma-
terial. Make sure the ambient temperat-
ures correspond to the climate category
of the appliance (see the chapter on “In-
tended use”).
4. Check the position of the appliance with
a spirit level.
(6)
(6)
5. Level out any unevenness on the
ground using both of the front screw
feet (6).
6. Tilt the appliance backwards slightly,
and screw/unscrew the screw feet.
7. Repeat the adjustment until the appli-
ance is upright and secure. The appli-
ance may not wobble.
Minimum distances and room
size
