Getting started
Page EN-13
About climate categories
– Always keep at the prescribed ambient temperature (see the chapter on “Intended use”).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone designation
Code
Definition
extended temperate zone
SN
This cooling appliance is designed for use at ambi-
ent temperatures of 10 to 32°C.
temperate zone
N
This cooling appliance is designed for use at ambi-
ent temperatures of 16 to 32°C.
subtropical zone
ST
This cooling appliance is designed for use at ambi-
ent temperatures of 16 to 38°C.
tropical zone
T
This cooling appliance is designed for use at ambi-
ent temperatures of 16 to 43°C.
If the room temperature drops significantly below this, the appliance will not switch on as of-
ten. This indicates that an unwelcome increase in temperature may occur.
Cleaning before use
In order to remove the odour, which is
present in all new appliances, wipe down
the interior with a solution made of 100 ml
of vinegar and 200 ml of water prior to first
use. Then wipe it out with clean water and
dry all of the parts off afterwards.
Attaching the door handle
Attach the door handle before starting to
use the appliance.
1. Unscrew both blind plugs from the side
of the appliance door.
2. Screw the door handle to the appliance
door using the screws provided.
3. Place the decorative covers on the
handle joints so that the hook on the in-
side of each cover engages in the
mount in the handle joint.
