7. Place the cover back on the refrigerator.
Push down on both sides (left and right)
of the front of the cover until you hear it
click into place.
8. Screw the two screws tightly back onto
the cover. To do this, use a cross-head
screwdriver. Secure the two screw cov-
ers.
9. Tilt the refrigerator backwards (maximum
45°) to allow you to adjust the lower door
hinge also.
10. Unscrew both front screw feet.
11. Unscrew the lower hinge plate. To do
this, use an 8 mm spanner or a cross-
head screwdriver.
12. Remove the door.
13. Remove the plastic insert from the un-
derside of the door.
14. Insert the loose plastic insert supplied
into the new hinge stop side and firmly
screw in.
15. Turn the lower hinge plate. Loosen the
hinge bolts with a 10 mm spanner. Loos-
en the screws and reinsert the screws
and the hinge bolts from the other side.
Changing the door hinges
Page EN-23
Summary of Contents for HKS8555EW
Page 30: ...Umweltschutz Seite DE 30...
Page 60: ......
