Start-up
Page EN-18
Setting up and aligning the
appliance
(3)
1. Place the appliance on as flat and as firm
a base as possible.
2. To ensure adequate air circulation, the
entire space above the appliance must
remain clear of obstructions.
3. Check the position with a spirit level.
4. Level out any unevenness on the ground
using the two front screw feet (3).
– Close the door.
– Tilt the appliance backwards slightly and
screw/unscrew the two screw feet (3).
– Stand the appliance back up again and
check the alignment with a spirit level.
– Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the door.
Changing the door hinges
If necessary, the side of the door hinges can
be changed. The door hinges are on the right
upon delivery.
This work requires some manual dexterity.
Please read the following steps completely
before changing the hinges.
In addition to the package contents, you will
require:
– Medium size cross-tip screwdriver
– 8 mm and 10 mm spanner
– A strong piece of string
– The assistance of another person, where
possible
WARNING
Risk of electric shock!
To change the door hinges you will need
to remove the cover from the appliance.
Live parts can become accessible by do-
ing so.
■
Pull the mains plug out of the sock-
et before starting to change the door
hinges.
Requirement: The appliance must not be
connected to the power supply.
Removing the cover
1. Carefully lever out the two screw covers
on top of the cover using a screwdriver.
Summary of Contents for HKS8555FW
Page 28: ...Service Seite DE 28 ...