Before starting to use the
appliance
• Read chapter “Safety” from page EN-4, in
particular the safety instructions.
Unpacking and setup
WARNING
Risk of suffocation!
Children can become entangled in the
packaging fi lm or swallow small parts
and suffocate.
■
Do not allow children to play with the
packaging fi lm.
CAUTION
Risk of injury!
Improper handling of the appliance
may result in injury.
■
The appliance is heavy and bulky.
Seek the help of another person when
moving the appliance.
■
Drawers, doors etc. must not be used
as steps or for support purposes.
Dangers from the refrigerant!
■
Do not damage the refrigerant cir-
cuit
, e.g. by puncturing the refrigerant
channels of the condensate evapora-
tor with sharp objects, bending the
piping, or cutting open the insulation.
■
Refrigerant is fl ammable when spurt-
ing out and can damage the eyes. In
this case, rinse your eyes in clean wa-
ter and seek medical assistance im-
mediately.
■
To prevent a fl ammable gas-air mix-
ture from forming following a leak-
age in the refrigeration circuit, the
installation space must have a min-
imum size of 1 m
3
per 8 g of refrig-
erant in compliance with the EN 378
standard. The amount of refrigerant
contained in your appliance can be
found in the data sheet at the end of
this user manual.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
If possible, do not tilt the cooling ap-
pliance horizontally.
■
Do not use sharp or pointed objects
to unpack it.
■
When unpacking the appliance, nev-
er damage the insulation material on
the back of the appliance.
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
“Getting started” on page EN-22).
1. Unpack the appliance and carefully re-
move all packaging, plastic profiles, adhe-
sive strips, protective film and foam pad-
ding from the inside, outside and reverse
of the appliance.
2. Select a suitable location and adhere to the
stipulated minimum distances and ambient
temperatures.
Getting started
Getting started
Page EN-22