(31)
(30)
6. Screw the hinge (30) of the freezer
door (31) tight.
Attaching the appliance door
(8)
1. Unscrew the support leg (8) from the ap-
pliance door (3), and screw it back in on
the opposite side.
2. Re-insert the appliance door (3).
(24)
(26)
(25)
3. Put the upper hinge plate (25) back on and
screw it tight using the fixing screws (24).
Screw the screws (26) onto the opposite
side.
4. Put the appliance cover (15) back on the
back of the appliance, and reconnect the
plug connector (23).
5. Put the appliance cover (15) on, and
screw it tightly back onto the reverse side
using both screws (22).
Changing the door handle
position
(33)
(20)
(21)
(4)
1. Pry out the blind plugs (21) from the door
handle (4), unscrew the screws (20), and
remove the door handle (4).
2. Pry out the white blind plugs (33) from the
other side of the appliance door (3), and
re-insert them on the other side from which
you removed the door handle (4).
3. Attach the door handle (4) to the other side,
as described in section “Installing the door
handle” on page EN-24.
Aligning the appliance
• Align the appliance as described in section
“Setting up and aligning the appliance” on
page EN-24.
Changing the door hinges
Page EN-29
