Start-up
Page GB-18
(3)
14. Screw both feet (3) back in. Ensure
that the larger of the two screw-in feet
(shown on left) is on the opposite side to
the hinge.
15. Replace the door on the bottom
hinge (21).
16. Re-attach the top hinge (19) to the
top of the appliance using the three
screws (16).
(15)
(18)
(17)
17. Attach the blind covers (15) and (18) and
the blind plugs (17) on the door frame.
18. Check whether the door seal is securely
in place (see „Checking and cleaning
door seals“ on page GB-13).
Inserting the defrost water
container
You must install the defrost water container
before using the appliance.
1
0
5
4
3
2
(09)
1. Remove the polystyrene block (09) at the
rear of the appliance.
(8)
(26)
2. Turn the defrost water container (8)in
such a way that the snap-in clip (26)
points downwards.
(29)
1
0
5
4
3
2
(8)
(28)
(26)
(27)
3. Insert the defrost water container (8)
between the compressor (27) and the
