Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
When positioning the appliance, en-
sure the supply cord is not trapped
or damaged. Do not kink the supply
cord or lay it over sharp edges.
NOTICE
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
■
To ensure adequate air circulation, do
not close the ventilation openings in
the appliance housing.
■
Do not place the appliance directly
against the wall. Adhere to minimum
distances (see “Choosing a suitable
location” on page EN-17).
Risk of malfunctioning!
The appliance may not operate proper-
ly if the ambient temperature exceeds
or falls below the specifi ed temperature
range for a prolonged period. This can
then lead to an increase in temperature
inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
“Intended use” on page EN-4).
– To prevent the formation of a flammable
gas-air mixture in the event of a leakage
in the refrigeration circuit, the installation
space must have a minimum size of 1 m
3
per 8 g of refrigerant in compliance with
the EN 378 standard. The amount of re-
frigerant contained in your appliance can
be found on the product fiche at the end of
this user manual.
– The appliance must only be placed on a
level and firm surface. The surface must be
strong enough to support the appliance’s
weight when fully laden.
– Suitable locations are dry, well-ventilated
areas that are cool if possible.
A:
835 mm
B:
550 mm
C:
100 mm
D: 583 mm
E:
1045 mm
F:
100 mm
G:
50 mm
H: 180°
I:
1085 mm
Space requirement
Start-up
Page EN-18
