Start-up
Page EN-14
(10)
(10)
5. Level out any unevenness on the ground
using both of the front screw feet (10).
6. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
7. Repeat the adjustment until the appli-
ance is upright and secure. The appliance
should not wobble when opening the ap-
pliance doors.
About climate categories
• Always ensure the prescribed ambient temperature is maintained (see „Intended use“ on
page EN-4).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone designation
Code Definition
extended temperate zone SN
This cooling appliance is designed for use at ambient
temperatures of +10 °C to +32 °C.
temperate zone
N
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +32 °C.
subtropical zone
ST
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +38 °C.
tropical zone
T
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +43 °C.
If the room temperature drops significantly below this, the appliance will not switch on as often.
This indicates that an unwelcome increase in temperature may occur.
Check the height of the doors.
If necessary, adjust the height of one door to
match the height of the other door using the
adjusting nuts (43).
(42)
(43)
8. Loosen the lock nuts (42).
9. Turn the adjusting nut anticlockwise with
a spanner to lift the door.
10. Turn the adjusting nut clockwise to lower
the door.
11. Fix the height of the door by tightening
the lock nut.
Summary of Contents for HSBS17590CWEI
Page 38: ......
