Start-up
Page GB-36
(53)
(54)
2. Remove the cap (53) from the white appli-
ance hose (54).
(54)
3. Insert the end of the appliance hose all
the way into the hose connector, to which
the arrow on the water filter points.
(49)
4. Fix the appliance hose using the safety
clip (49).
5. Insert the end of the inlet hose (52) all the
way into the free hose connector on the
water filter, and fix the inlet hose in place
using a safety clip.
(52) (54)
Loosening the hose connectors
1. Pull the safety clip (49) off.
2. Using a small, flat-headed screwdriver,
press the connector ring on the hose con-
nector (40) or (56) in the direction of the
hose connector while at the same time
removing the hose connector.
Extend the appliance hose
To extend the white appliance hose (54), you
will need these parts:
(49)
1x safety clip
(55)
1× extension hose
blue, 6 m
(54)
(55)
(53)
(56)
1. Remove the cap (53) from the white appli-
ance hose (54) and insert the end of the
white appliance hose all the way into the
hose connector (56) found on the hose
extension (55).
(49)
2. Fix the hose extension using the safety
clip (49).
3. Clean the water filter (41) as described in
section "14.9 cm“ on page GB-35. Follow
steps 3 to 5. Now use the blue extension
hose instead of the white appliance hose.
Summary of Contents for HSBS17990WEA1BK
Page 50: ......
