Removing cold water and ice
Page EN-25
Dispensing cold water
NOTICE
Risk of damage!
Overheating can result in damage to
the ice maker.
■
Do not dispense water from the cold
water outlet for longer than 3 min-
utes at a time.
QUICK FRZ
QUICK REF
FILTER RESET /3S
HOLD 3S UNLOCK
(24)
(23)
1. To dispense cold water, press the DIS-
PENSER selection button (24) enough
times until the symbol (23) appears on
the display.
HOLD 3S UNLOCK
(33)
2. Push the container against the dispenser
pad (33).
Cold water will begin to pour into the con-
tainer.
3. Remove the vessel from the dispenser
guide to stop the flow of water.
Dispensing crushed ice
QUICK FRZ
QUICK REF
FILTER RESET /3S
HOLD 3S UNLOCK
(24)
(25)
1. Press the DISPENSER selection but-
ton (24) enough times until the sym-
bol (25) appears on the display.
HOLD 3S UNLOCK
(33)
(34)
2. Hold the vessel as closely as possible
to the opening for the ice (34), in order
to avoid crushed ice from spraying out
around the sides of the vessel.
3. Push the vessel against the dispenser
guide (33). The vessel will be filled with
crushed ice.
4. To stop the flow of ice, pull the vessel
back slightly from the dispenser guide.
Hold the container under the ice dispens-
er for another 2 seconds to prevent ice
from spraying to the sides.
