Start-up
Page GB-38
(43)
(42)
(42)
1. Insert the hose couplings (42) into the wa-
ter filter (43) and firmly press them down.
(55)
(56)
2. Remove the cap (55) from the white appli-
ance hose (56).
(56)
3. Insert the end of the appliance hose into
the hose coupling to which the arrow on
the water filter is pointing until it makes
contact.
(51)
4. Fix the appliance hose in place using a
safety clip (51).
5. Insert one end of the inlet hose (54) into
the available hose coupling on the water
filter until it makes contact and fix the inlet
hose in place using a safety clip.
(54) (56)
Disconnecting the hoses
1. Remove the safety clip(51).
2. To do this, push the connector ring on the
hose coupling (42)on or(58) in the direc-
tion of the hose coupling using a small
slot screwdriver while pulling off the hose
coupling.
Extending the appliance hose
You will need these parts to extend the white
appliance hose (56):
(51)
1× Safety clip
(57)
1× Extension hose,
blue, 6 m
(56)
(57)
(55)
(58)
1. Remove the cap (55) from the white ap-
pliance hose (56) and insert the end of
the appliance hose into the hose coupling
(58) on the extension hose (57) until it
makes contact.
