Appliance parts
Page EN-12
Safety lock (child safety lock)
The appliance is equipped with a safety lock.
When this is activated, no settings can be
changed.
• To activate the safety lock press the but-
tons (9) and (10) at the
same time
.
A beep will sound. The safety lock is now
activated.
• To deactivate the safety lock again press
the buttons (9) and (10) at the
same time
.
A beep will sound. The safety lock is now
deactivated.
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
“Intended use” on page EN-4).
Select an internal temperature to suit the
wine. Further information on the optimum
storage temperature can be found in the sec-
tion “Maintaining quality” on page EN-15.
You can set the appliance to a temperature
from +5 °C to +22 °C (41 °F to 72 °F).
The temperature for the lower range can only
be set equal to or higher than the temperature
in the upper range.
1. Select the desired interior zone by press-
ing the key (11)
– once for the upper zone. The left-hand
temperature indicator (12) will flash.
– twice for the lower zone.
The right-hand temperature indicator
8.8.
8.8.
(12) will flash.
As long as the temperature indicator is
flashing, you can set the temperature.
2. The temperature of the selected zone can be
– increased by pressing the key (13)
until the desired temperature is dis-
played.
– reduced by pressing the key (14) until
the desired temperature is displayed.
After a short while the flashing will stop and
the desired temperature will be set.
The appliance will adjust itself to the set
temperature while showing the current in-
ternal temperature.
If you set a lower temperature, you
will need higher cooling performance.
This increases the energy consumption.
Changing the temperature unit
You can choose whether the internal temper-
ature is displayed in Celsius or in Fahrenheit.
The small green symbol on the top right next
to the temperature indicator
8.8.
8.8.
(12) lets
you identify the current setting.
• To change the unit, press the
C
F
key (15).
Summary of Contents for HWC46GCIA
Page 30: ......
