Operation
Page EN-10
Before getting started
– Read the „Safety“ chapter from page EN-5.
– Set up and connect the appliance as de-
scribed in chapter „Start-up“ from page
EN-17.
Key tones
You will hear a beep each time you press one
of these keys: (5), (6), (8) and (9). This tells
you that the appliance has registered your
keypress.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
The temperature indicator will show the
current temperature in the appliance.
Operation
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
The key lock is activated the first time it is
switched on.
Switching on
• Press the key (5).
A beep will sound.
The temperature indicator (7) will show the
current temperature in the appliance.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching off
• Press the key (5).
The temperature indicator (7) will go out.
The compressor will not work and the
appliance will stop cooling.
The appliance is switched off.
(5) Key „On/Off“
(6) Key „Light on/off“
(7) Temperature indicator
The control panel
(8) Key „Increase temperature“
(9) Key „Decrease temperature“
8.8.8.
°C
°
°F
(5)
(6)
(7)
(8)
(9)
