Operation
Page EN-11
Key lock
The key lock will be automatically activated
approx. 20 seconds after the settings have
been changed using the control panel. This
is to prevent users from making any uninten-
tional changes to the settings. You can deac-
tivate the key lock at any time.
• To deactivate the key lock, press and hold
the key (5) and the key (6) simultane-
ously for approx. 2 seconds.
You will hear a beep sound indicating the
key lock is now deactivated. You can now
enter your desired settings.
• To activate the key lock, press and hold
the key and the key simultaneously
for approx. 2 seconds again.
You will hear a beep sound indicating the
key lock is now active.
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always adhere to the prescribed am-
bient temperature (see data sheet at
the end of this user manual).
Select an internal temperature to suit the
wine. Further information on the optimum
storage temperature can be found in the sec-
tion „Maintaining quality“ on page EN-14.
You can set the appliance to a temperature
from +5°C to +20°C (41°F to 67°F).
• To set
– the temperature higher, press the key (8)
repeatedly until the desired temperature is
shown.
– the temperature lower, press the key (9)
repeatedly until the desired temperature is
shown.
After a short while the flashing will stop and
the desired temperature will be set.
The appliance will adjust itself to the set
temperature while showing the current
internal temperature.
Changing the temperature
unit
You can choose whether the internal tempera-
ture is shown in Celsius (
°C
) or Fahrenheit (
°F
).
You can find the current setting on the tem-
perature indicator.
• To change the temperature unit, press the
key (8) and the key (9) simultane-
ously.
LED light
• To switch the LED on or off, press the
key (6).
